restore image
Use this command to install firmware on the primary partition and reboot.
Unlike installing firmware via TFTP during a boot interrupt, installing firmware using this command will attempt to preserve settings and files, and not necessarily restore the FortiWeb appliance to its firmware/factory default configuration.
To use this command, your administrator account’s access control profile must have either
w or
rw permission to the
mntgrp area. For more information, see
“Permissions”.
Syntax
Variable | Description | Default |
<filename_str> | Type the name of the firmware image file. | No default. |
<ftp_ipv4> | Type the IP address of the TFTP server. | No default. |
<tftp_ipv4> | Type the IP address of the FTP server. | No default. |
Example
This example installs a firmware file named firmware.out from the TFTP server, 192.168.1.23, to the FortiWeb appliance.
execute restore image tftp firmware.out 192.168.1.23
The FortiWeb appliance downloads the firmware file, installs it, and reboots.
Related topics