system raid
Use this command to configure the RAID level.
Currently, only RAID level 1 is supported, and only on the following models shipped with FortiWeb 4.0 MR1 or later:
• FortiWeb-1000B
• FortiWeb-1000C
• FortiWeb-1000D
• FortiWeb-3000C
• FortiWeb-3000D
• FortiWeb-4000C
• FortiWeb-4000D
On older appliances that have been upgraded to FortiWeb 4.0 MR1, RAID cannot be activated.
| Back up the data regularly. RAID is not a substitute for regular backups. RAID 1 (mirroring) is designed to improve hardware fault tolerance, but cannot negate all risks. |
To use this command, your administrator account’s access control profile must have either
w or
rw permission to the
sysgrp area. For more information, see
“Permissions”.
Syntax
config system raid
end
Variable | Description | Default |
level {raid1} | Type the RAID level. Currently, only RAID level 1 is supported. | raid1 |
Example
This example sets RAID level 1.
config system raid
set level raid1
end
Related topics