user ntlm-user

config : user ntlm-user

user ntlm-user

Use this command to configure user accounts that will authenticate with the FortiWeb appliance via an NT LAN Manager (NTLM) server.

NTLM queries can be made to a Microsoft Windows or Active Directory server that has been configured for NTLM authentication. Both NTLM v1 and NTLM v2 versions of the protocol are supported.

NTLM user queries are used by the HTTP authentication feature to authorize HTTP requests. For details, see the FortiWeb Administration Guide.

To incorporate NTLM user account queries, add them to a user group that is selected within an authentication rule, which is in turn selected within an authentication policy. For details, see “config user user-group”.

To use this command, your administrator account’s access control profile must have either w or rw permission to the authusergrp area. For more information, see “Permissions”.

Syntax

config user ntlm-user

edit <ntlm-query_name>

set port <port_int>

set server <ntlm_ipv4>

end


Variable	Description	Default
<ntlm-query_name>	Type the name of the NTLM user query. The maximum length is 35 characters. To display the list of existing queries, type: edit ?	No default.
port <port_int>	Type the port number where the NTLM server listens. The valid range is from 1 to 65,535.	445
server <ntlm_ipv4>	Type the IP address of the NTLM server.	No default.

Example

This example configures an NTLM query connection to a server at 172.16.1.101 on port 445.

config user ntlm-user

edit "ntlm-user1"

set server "172.16.1.101"

set port 445

end