config : system console
 
system console
Use this command to configure the management console settings. Usually this is set during the early stages of installation and needs no adjustment.
To use this command, your administrator account’s access control profile must have either w or rw permission to the sysgrp area. For more information, see “Permissions”.
Syntax
config system console
set baudrate {9600 | 19200 | 38400 | 57600 | 115200}
set mode {batch | line}
set output {more | standard}
end
Variable
Description
Default
baudrate {9600 | 19200 | 38400 | 57600 | 115200}
Select the baud rate of the console connection. The rate should conform to the specifications of your specific FortiWeb appliance.
9600
mode {batch | line}
Select the console input mode: either batch or line.
line
output {more | standard}
Select either:
• more — When displaying multiple pages’ worth of output, pause after displaying each page’s worth of text. When the display pauses, the last line displays ‑‑More‑‑. You can then either:
• Press the spacebar to display the next page.
• Type Q to truncate the output and return to the command prompt.
• standard — Do not pause between pages’ worth of output, and do not offer to truncate output.
standard
shell [cli | sh}
Select either:
• cli — Command-line shell.
• sh — Busybox shell.
cli
Example
This example configures the local console connection to operate at 9,600 baud, and to show long output in a paged format.
config system console
set baudrate 9600
set output more
end
Related topics
• config system admin