config : system autoupdate tunneling
 
system autoupdate tunneling
Use this command to configure the FortiWeb appliance to use a proxy server to connect to the Fortinet Distribution Network (FDN).
The FortiWeb appliance will connect to the proxy using the HTTP CONNECT method, as described in RFC 2616.
To use this command, your administrator account’s access control profile must have either w or rw permission to the sysgrp area. For more information, see “Permissions”.
Syntax
config system autoupdate tunneling
set status {enable | disable}
set address {<proxy_fqdn> | <proxy_ipv4>}
set port <port_int>
set username <proxy-user_str>
set password <proxy-password_str>
end
Variable
Description
Default
status {enable | disable}
Enable to connect to the FDN through a web proxy.
disable
address {<proxy_fqdn> | <proxy_ipv4>}
Type either the IP address or fully qualified domain name (FQDN) of the web proxy. The maximum length is 63 characters.
No default.
port <port_int>
Type the port number on which the web proxy listens for connections. The valid range is from 0 to 65,535.
0
username <proxy-user_str>
If the proxy requires authentication, type the FortiWeb appliance’s login name on the web proxy.The maximum length is 49 characters.
No default.
password <proxy-password_str>
If the proxy requires authentication, type the password for the FortiWeb appliance’s login name on the web proxy. The maximum length is 49 characters.
No default.
Example
This example configures the FortiWeb appliance to connect through a web proxy that requires authentication.
config system autoupdate tunneling
set status enable
set address 192.168.1.10
set port 1443
set username fortiweb
set password myPassword1
end
Related topics
• config system autoupdate schedule