Device Manager : Viewing managed device : View managed devices : Dashboard toolbar
 
Dashboard toolbar
The dashboard toolbar allows you to select the content, or panel, that is shown in the lower content pane.
The dashboard toolbar displays the device name and current panel on the right-hand side. Hovering the cursor over the Menu drop-down menu, on the left-hand side of the toolbar, will display the available panels organized into categories.
Figure 76: Device panel categories
The available panels can be customized at both the ADOM and device level.
Right-click on an ADOM in the navigation tree and select Customize Device Tabs to customize the available content at the ADOM level.
Select [Customize] in the dashboard toolbar to customize the available panels at the device level.
 
The options available on the dashboard toolbar will vary from device to device depending on what feature set the device supports. If a feature is not enabled on the device the corresponding tab will not be available on the toolbar.
 
The options available when customizing device tabs at the ADOM level will vary based on the ADOM version.
Figure 77: Customize tabs
To select all of the content panels in a particular category, select All On in that categories row. To reset a categories selection, select Reset.
To select all of the content panels, select All On at the bottom of the window. To reset all of the selected panels, select Reset at the bottom of the window.
The following tables provide an overview and descriptions of common dashboard toolbar panels, and content options.
The following options are available for System:
System
 
 
Dashboard
View device dashboard widgets including:
• System Information: View device hostname, serial number, update firmware, enable VDOMs, and change system time.
• License Information: View support contract and other device license information.
• Connection Summary: Refresh connectivity and connect to the device CLI via TELNET or SSH.
• Configuration and Installation Status: Change the system template, view database configuration, view revision history and revision diff, refresh sync status, installation preview, and view script history.
For more information, see “Dashboard widgets”.
 
Zone & Interface
Configure interfaces, VDOM links, zone mapping for interfaces, and intra-zone traffic.
For more information, see “Zone & Interface”.
 
Port Pair
Configure port pairs for transparent VDOMs.
 
Virtual Domain
Configure virtual domains. Set the management virtual domain.
 
Global Resources
Select to view virtual domain resources. Left-click on a resource entry to configure settings. Right-click a resource entry to reset the value to default.
 
DHCP Server
Configure DHCP server and relay service settings.
 
IP Reservation
Configure regular and IPsec IP/MAC address reservations.
 
Modem
Enable and configure USB modem settings including up to three dialup accounts.
 
Sniffer Policy
Configure sniffer policies.
 
HA
View high availability configuration and cluster settings.
 
SNMP
Create new, enable, disable, and view SNMP v1, v2c, v3 Agent and Community configuration.
 
DNS
Configure IPv4 and IPv6 DNS or FortiGuard DDNS settings.
 
DNS Database
Create new, edit, and delete DNS zones.
 
DNS Service on Interface
Configure the DNS service on the interface. Select the interface from the drop-down list and then select the mode. You can select one of the following modes: Recursive, Non-recursive, or Forward to System DNS.
 
Explicit Proxy
Configure explicit web proxy options. Create new web proxy forwarding servers. Configure explicit FTP proxy options.
 
Management
Configure the management IP address and netmask.
 
Admin Settings
Configure Central Management, Web Administration Ports, Timeout Settings, Web Administration, and LCD Panel.
 
Administrators
Create new, edit, and delete administrators.
 
Admin Profile
Configure administrator access profiles. Configure as global or VDOM, and set WiFi access.
 
FSSO
Configure FSSO agents and LDAP server settings.
 
Local Host ID
Configure the local host ID. Advanced options include setting the tunnel SSL algorithm and the auto detect algorithm.
 
CA Certificates
Import, view, and delete CA certificates.
 
Replacement Message
Configure replacement messages.
You can configure replacement messages for the following categories: Mail, HTTP, Web Proxy, FTP Proxy, FTP, NNTP, Alert Mail, Spam, Administration, Authentication, Captive Portal Default, FortiGuard Web Filtering, IM and P2P, Endpoint NAC, NAC Quarantine, Traffic Quota Control, SSL VPN, and Security.
 
FortiGuard
Configure FortiGuard Distribution Network (FDN) services and settings.
 
Messaging Servers
Configure SMTP server settings.
 
Log Setting
Configure logging, and archiving settings. Enable event logging, and specify the types of events to log. You can select to enable memory logging, send logs to FortiAnalyzer/FortiManager, or Syslog.
For more information, see “Log Setting”.
 
Alert E-mail
Configure alert email settings.
 
NAT64 Prefix
Enable NAT64 prefix and configure NAT64 prefix and always synthesize AAAA records.
 
FortiSandbox
Enable Sandbox inspection and configure the IP address and notifier email of your FortiSandbox device.
The following options are available for Router:
Router
 
 
Routing Table
View the routing table.
 
Static Route
Configure static routes.
 
IPv6 Static Route
Configure IPv6 static routes.
 
Policy Route
Configure policy routes.
 
Gateway Detection
Configure new dead gateway detection.
 
OSPF
Configure OSPF default information, redistribute. Create new areas, network, and interfaces.
 
RIP
Configure RIP version, add networks, create new interfaces.
 
BGP
Configure local AS and router ID. Add neighbors and networks.
 
Multicast Route
Enable multicast routing, add static rendezvous points, and create new interfaces.
 
Multicast Policy
Configure multicast policies.
 
Multicast Address
Configure multicast addresses.
The following options are available for Dynamic Objects:
Dynamic Objects
 
 
Address
Configure dynamic to local address mappings.
 
IPv6 Address
Configure IPv6 dynamic to local address mappings.
 
Virtual IP
Configure dynamic virtual IP to local virtual IP mappings.
 
IPv6 Virtual IP
Configure IPv6 dynamic virtual IP to local virtual IP mappings.
 
NAT46 Virtual IP
Configure NAT64 dynamic virtual IP to local virtual IP mappings.
 
NAT64 Virtual IP
Configure NAT64 dynamic virtual IP to local virtual IP mappings.
 
IP Pool
Configure dynamic IP pool to local IP pool mappings.
 
IPv6 Pool
Configure dynamic IPv6 pool to local IP pool mappings.
 
Local Certificate
Configure dynamic local certificate to VPN local certificate mappings.
 
VPN Tunnel
Configure dynamic VPN tunnel to VPN tunnel mappings.
 
RADIUS Server
Map a dynamic RADIUS server to a local RADIUS server.
 
Tag Management
Configure Tag Management.
The following options are available for WAN Opt. & Cache:
WAN Opt. & Cache
 
 
Local Host ID
Configure the local host ID.
 
Rule
Configure WAN optimization rules.
 
Peer
Configure WAN optimization peers.
 
Authentication Group
Configure authentication groups.
 
Setting
Configure cache options.
 
URL Match List
Create, view, edit, and delete URL match entries.
 
Exempt List
Configure exempt URLs.
The following options are available for VPN:
VPN
 
 
IPsec Phase 1
Configure IPsec Phase 1 settings. Create FortiClient VPN.
 
IPsec Phase 2
Configure IPsec Phase 2 settings.
 
Manual Key
Configure manual key settings.
 
Concentrator
Configure concentrator settings.
Column settings include Concentrator Name, Members, and Last Modified.
 
SSLVPN Config
Configure SSL VPN settings including DNS and WINS servers.
The following options are available for Client Reputation Profile:
Client Reputation Profile
 
 
Client Reputation Profile
Select to use a shared client reputation profile from the drop-down list or select Specify to define the profile.
The following options are available for User & Device:
User & Device
 
 
Endpoint Profile
Create, view, edit, and delete endpoint profiles.
 
Client Reputation Profile
Create, view, edit, and delete client reputation profiles.
The following options are available for Wireless:
Wireless
 
 
Managed FortiAP
Discover and authorize FortiAP devices. View managed FortiAP settings.
Column settings include State, Name, Serial Number, SSIDs, AP Profile, and Last Modified.
 
WiFi SSID
Configure WiFi SSID.
 
WIDS Profile
Configure wireless intrusion detection system (WIDS) profiles.
 
Rogue AP Settings
Enable or disable rogue AP detection and on-wire rogue AP detection technique.
 
Local WiFi Radio
Configure the local radio.
 
Custom AP Profile
Configure AP profiles.
The following options are available for Query:
Query
 
 
DHCP
DHCP query for the device selected including Interface, IP, MAC address, VCI, expiry and Status.
 
IPsec VPN
IPsec VPN query for the device selected including Name, Type, User Name, Incoming Data, Outgoing Data, Gateway, Port, Source Proxy, Destination Proxy, Status, P2 Name, P2 SN, Timeout, and Up Time. You can change the status of a connection from this tab.
 
SSL-VPN
SSL-VPN query information for the device selected including User Name, Remote Host, Last Login Time, Subsession Type and Subsession Description.
 
User
User query for the device selected including User Name, User Group, Policy ID, Duration, Expiry, Traffic Volume and Method. You have the option to de authorize a user.
 
Session
Session query information for the device selected.
 
Traffic Shaper
Traffic Shaper query information for the device selected.
 
FortiToken
FortiToken query for the device selected including the Serial Number and Status. You can activate a FortiToken from this tab.
 
Web Filter
Web filter query for the device selected including Protocol, Requests, Quarantined, Email Filter, Banned Word, File Filter, AntiVirus, Archive, FortiGuard, URL Filter, and Fragmented.
 
Application
Application query for the device selected including ID, Bytes, Application Name and Sessions.
 
Email
Email query for the device selected including Protocol, Requests, Email Filter, Banned Word, File Filter, AntiVirus, Archive, FortiGuard, URL Filter and Fragmented.
 
Routing
Routing query for the device selected including IP Version, Type, Subtype, Network, Gateway, Interface, Up Time, Distance, and Metric.
 
Archive & Data Leak
Archive and data leak queries for the device selected.
 
WiFi Clients
WiFi client query including IP, SSID, FortiAP, MAC Address, Authentication, Vendor Info, Rate, Signal Strength, Idle Time, Association Time, and Bandwidth Tx/Rx.
 
Rogue AP
Rogue AP query including State, Online Status, SSID, MAC Address, Vendor Info, Security Type, Signal Strength, Channel, Rate, First Seen, Last Seen, Detected By, and On-Wire. You have the option to change the status of a connection from this tab.
 
Logging
Logging queries.
The following option is available for Report:
Report
 
 
Report
View, download, and delete device reports.
The following options are available at the ADOM level only:
ADOM Level Options
 
 
Inherit From ADOM
Select to inherit the customize device tabs settings from the ADOM.
 
Customize
Select to customize the device tabs settings for the device selected.
Figure 78 provides an example of the routing query output.
Figure 78: Routing query output
For information on configuring FortiGate settings locally on your FortiManager device, see the FortiOS 5.0 Handbook.