Using the Port Statistics graphs
You use the Port Statistics graphs to monitor network interface throughput.
FortiDDoS ports are configured as network interface pairs. You configure odd-numbered ports for the LAN-side connection and even-numbered ports for the WAN-side connection.
The Port Statistics set includes the following graphs:
• Packets—Throughput in packets per second.
• Bits—Throughput in bits per second.
Figure 48 shows the Packets graph.
You can customize the following query terms: interface pair, period, and direction.
Note: Port statistics are not maintained per SPP. You cannot query by SPP, and port statistics are not reset when you reset SPP statistics. Port statistics are global data that gets reset only when you perform a complete factory reset and reformat the log disk.
Before you begin:
• You must have Read-Write permission for Log & Report settings.
To display the graphs:
• Go to Monitor > Port Statistics > [Selection].
Note: For Port Statistics graphs, the data resolution for the 1 hour period is 30 seconds.
