Protection Profiles : Configuring SPP ACL address objects
 
Configuring SPP ACL address objects
You create SPP ACL address configuration objects to identify IP addresses and subnets that you want to match in SPP ACL policies.
Before you begin:
• You must have Read-Write permission for Protection Profile settings.
To configure the addresses:
1. Go to Protection Profiles > Address > [Address Config | Address Config IPv6].
2. Select the SPP you want to configure from the drop-down list.
3. Click Add to display the configuration editor.
4. Complete the configuration as described in Table 33.
5. Save the configuration.
Table 33: Address configuration
Settings
Guidelines
Name
Configuration name. Must not contain spaces.
Address
Specify an IP address.
 
 
To configure with the CLI, use a command sequence similar to the following:
config spp
edit <spp_name>
config ddos spp {address | address6} <address_name> spp-source-ip-address {<address_ipv4> | <address_ipv6}
end