Installing FortiDB Firmware

This procedure installs a specified firmware image and resets the FortiDB system to default settings. You can use this procedure to upgrade to a new firmware version, revert to an older firmware version, or re-install the current firmware version.

To use this procedure, you must connect to the CLI using the FortiDB console port and a RJ-45 to DB-9 or null-modem cable. This procedure reverts the FortiDB system to its factory default configuration.

For this procedure you:

• Access the CLI by connecting to the FortiDB console port.
• Install a TFTP server that you can connect from the FortiDB interface. The TFTP server should be on the same subnet as the internal interface.

• Installing Firmware using Boot Loader Menu
  This procedure installs a specified firmware image and resets the FortiDB system to default settings. You can use this procedure to upgrade to a new firmware version, revert to an older firmware version, or re-install the current firmware version.