Setting | Guidelines |
Daylight Savings Time | Enable if you want the system to adjust its own clock when its time zone changes between daylight saving time (DST) and standard time. |
Time Zone | Select the time zone where the appliance is located. |
NTP | |
NTP | Select to use NTP. |
NTP Server | Specify the IP address or domain name of an NTP server or pool, such as pool.ntp.org. To find an NTP server, go to http://www.ntp.org. |
Synchronizing Interval | Specify how often the system synchronizes its time with the NTP server, in minutes. The default is 60. The valid range is 1-1440. |
To configure NTP using the CLI: config system time ntp set ntpsync enable set ntpserver {<server_fqdn> | <server_ipv4>} set syncinterval <minutes_int> end To configure the system time manually: config system time ntp set ntpsync disable end config system time manual set zone <timezone_index> set daylight-saving-time {enable | disable} end execute time <time_str> execute date <date_str> |