System Settings : General settings : Network
 
Network
The FortiAnalyzer unit can manage Fortinet devices connected to any of its interfaces. The DNS servers must be on the networks to which the FortiAnalyzer unit connects, and should have two different addresses.
To view the configured network interfaces, go to System Settings > General > Network. The Network screen is displayed.
Figure 44: Network screen
The following information is available:
Management Interface
 
IP/Netmask
The IP address and netmask associated with this interface.
 
IPv6 Address
The IPv6 address and netmask associated with this interface.
 
Administrative Access
Select the allowed administrative service protocols from: HTTPS, HTTP, PING, SSH, Telnet, SNMP, Web Service, and Aggregator.
 
IPv6 Administrative Access
Select the allowed IPv6 administrative service protocols from: HTTPS, HTTP, PING, SSH, Telnet, SNMP, Web Service, and Aggregator.
 
Default Gateway
The default gateway associated with this interface
DNS
 
Primary DNS Server
Enter the primary DNS server IP address.
 
Secondary DNS Server
Enter the secondary DNS server IP address.
All Interfaces
Click to open the network interface list. See “Viewing the network interface list”.
Routing Table
Click to open the routing table. See “Configuring static routes”.
IPv6 Routing Table
Click to open the IPv6 routing table. See “Configuring IPv6 static routes”.
Diagnostic Tools
Select to run available diagnostic tools, including Ping, Traceroute, and View logs.