hardware harddisk
Use this command to display a list of hard disks and their capacity in megabytes (MB) in the FortiWeb appliance. (In the case of FortiWeb-VM, this will instead be for virtual hardware.)
To use this command, your administrator account’s access control profile must have at least
r permission to the
sysgrp area. For more information, see
“Permissions”.
Syntax
diagnose hardware harddisk [list]
Example
diagnose hardware harddisk list
Output similar to the following appears in the CLI:
name size(M)
sda 625.56
sdb 32212.25
On a FortiWeb 1000C with a single properly functioning internal hard disk plus its internal flash disk, this command should show two file systems:
name size(M)
sda 1000204.89
sdb 1971.32
where sda, the larger file system, is from the hard disk used to store non-configuration/firmware data. If it does not appear, you can reboot and attempt to run a file system check to fix the file system and mount it.
Similarly FortiWeb 3000D shows:
name size(M)
sda 1999844.15
sdb 2055.21
Related topics