Working with Devices or Applications

You can create a device/application if it is not available in the list for creating a parser or monitoring under ADMIN > Device Support > Devices/Apps.

This section provides the procedure to configure devices or applications.

Adding a Device or Application

Complete these steps to add a new device or application:

  1. Go to ADMIN > Device Support > Devices/Apps tab.
  2. Click New
  3. In the Device/Application Type Definition dialog box, enter the information below.
    SettingsGuidelines
    Category[Required] Select the Device or Application from the drop-down list.
    Vendor[Required] Vendor of the device or application.
    Model[Required] Device or application model.
    Version[Required] Version number of the device or application.
    Device/App Group[Required] Select the group where you want to add this new device/application
    Biz Service GroupSelect the Biz Service group.
    Access ProtocolSelect the Access Protocol from the drop-down.
    App Package GroupThis setting is applicable only for 'Application' category. Enter the app package group here.
    DescriptionDescription about the device or application.
  4. Click Save.
    The new device(s)/application(s) appears in the list.
  5. Select the device(s)/application(s) from the list and click Apply.

You can clone an existing device/application by clicking Clone and modify as necessary.

Modifying a Device or Application

Complete these steps to modify a device or application:

  1. Select one or more device(s)/application(s) to edit from the list.
  2. Click the required option:
    • Edit to modify any device/application setting.
    • Delete to remove any device /application.
  3. Click Save.