Adding Remediations

You can select any existing Remediation to Clone and customize or create a new custom Remediation following the procedure below:

1. Go to RESOURCES > Remediations.
2. Enter the Name of the Remediation.
3. Select the Device Type for which this Remediation has to be applied.
4. Select the Protocol as SSH, HTTP, HTTPS or MS_WMI for the device type.
5. Enter the Remediation Script Name.
6. Enter the Remediation Script Content.
7. Add any Description related to this Remediation.
8. Click Save.
   This Remediation will be available in the list along with the system-defined Remediations.