Working with Devices or Applications
You can create a device/application if it is not available in the list for creating a parser or monitoring under ADMIN > Device Support > Device/App.
This section provides the procedure to configure devices or applications.
Adding a device or application
Follow the procedure below to add a new device or application:
- Go to ADMIN > Device Support> Device/App tab.
- Click New.
- In the Device/Application Type Definition dialog box, enter the information below.
Settings Guidelines Category [Required] Select the Device or Application from the drop-down. Vendor [Required] Vendor of the device or application. Model [Required] Device or application model. Version [Required] Version number of the device or application. Device/App Group [Required] Select the group where you want to add this new device/application Biz Service Group Select the Biz Service group. Access Protocol Select the Access Protocol from the drop-down. App Package Group This setting is applicable only for 'Application' category. Enter the app package group here. Description Description about the device or application. - Click Save.
The new device(s)/application(s) appears in the list - Select the device(s)/application(s) from the list and click Apply.
You can clone an existing device/application by clicking Clone and modify as necessary.
Modifying a device/application
Follow the procedure below to modify a device or application:
- Select one or more device(s)/application(s) to edit from the list.
- Click the required option:
- Edit to modify any device/application setting.
- Delete to remove any device /application.
- Click Save.