Creating event attributes

This section provides the procedure to create event attributes.

• Adding an event attribute
• Modifying an event attribute

Adding an event attributes

Follow the procedure below to add an event attribute:

1. Log in to your Supervisor node as a Super/Global user.
2. Go to ADMIN > Device Support> Event Attribute tab.
3. Click New. 
4. In the Event Attribute Definition dialog box, enter the information below.
   
   

   Settings	Guidelines
   Name*	Event attribute name
   Display Name*	Display name of the event attribute
   Value Type	Device or application mode
   Display Format Type	Units in which the event attribute has to be displayed
   Description	Description of the event attribute
   Note: Settings marked with * are mandatory.

5. Click Save.
   The new event attribute appears in the list
6. Select the event attribute(s) from the list and click Apply.

Modifying a device/application

Follow the procedure below to modify an event attribute setting:

1. Go to ADMIN > Device Support> Event Attribute tab.
2. Select one or more event attribute(s) to edit from the list.
3. Select the required action from the following table.
   
   
   
   

   Option	Description
   Edit	Allows to modify the settings of a selected event attribute(s).
   Delete	Deletes the selected event attribute(s).
   Clone	Duplicates the selected event attribute(s).

4. Click Save.