Configuring RAID levels
FortiRecorder 400D model comes with two pre-installed hard drives in its four HDD bays and supports software RAID. This means that you can add two more hard drives if required.
Table 7: FortiRecorder 400D supported RAID levels
Number of Installed Hard Disk Drives | Available RAID Levels | Default RAID Level |
1 | 0 | 0 |
2 | 0, 1 | 1 |
3 | 0, 1 + hot spare, 5 | 5 |
4 | 5 + hot spare, 10 | 10 |
To configure RAID levels
| Back up data on the HDD before beginning this procedure. Changing the device’s RAID level temporarily suspends all data processing and erases all data on the HDD. |
1. Connect to the CLI console.
2. Enter the following command:
execute raidlevel <level>
The FortiRecorder unit changes the RAID level and reboots.