ICMPv6 Service
The IT Manager is doing some diagnostics and would like to temporarily block the successful replies of ICMP Node information Responses between 2 IPv6 networks.
The ICMP type for ICMP Node informations responses is 140. The codes for a successful response is 0.
Web-based Manager Instructions
Go to Policy & Objects > Objects > Services and select Create New > Service.
Fill out the fields with the following information
Name | diagnostic-test1 |
Comments | <Input into this field is optional> |
Service Type | Firewall |
Show in Service List | Check in check box |
Category | Uncategorized |
Protocol Type | ICMP6 |
Type | 140 |
Code | 0 |
Select OK.
Enter the following CLI command:
config firewall service custom
edit diagnostic-test1
set protocol ICMP6
set icmptype 140
set icmpcode 0
set visibility enable
end
To verify that the category was added correctly:
Go to Policy & Objects > Objects > Services. Check that the services have been added to the services list and that they are correct.
Enter the following CLI command:
config firewall service custom
edit <the name of the service that you wish to verify>
show full-configuration