Configuring Router3
Router3 is part of the R&D network backbone area (0.0.0.0). Router2 and Router3 are in this area. They provide a redundant connection between area 1.1.1.1 and area 2.2.2.2.
To configure Router3 interfaces - web-based manager
1. Go to System > Dashboard > Status.
2. Next to hostname, select Change.
3. Enter a hostname of Router3, and select OK.
4. Go to System > Network > Interfaces, edit port1 (internal), set the following information, and select OK.
Alias | internal |
IP/Network Mask | 10.11.103.3/255.255.255.0 |
Administrative Access | HTTPS SSH PING |
Description | Internal RnD network |
Administrative Status | Up |
5. Edit port2 (external1), set the following information, and select OK.
Alias | external1 |
IP/Network Mask | 10.11.110.3/255.255.255.0 |
Administrative Access | HTTPS SSH PING |
Description | Router2 first connection |
Administrative Status | Up |
6. Edit port3 (external2), set the following information, and select OK.
Alias | external2 |
IP/Network Mask | 10.11.111.3/255.255.255.0 |
Administrative Access | HTTPS SSH PING |
Description | Router2 second connection |
Administrative Status | Up |