Configuring Router3
Router3 is similar to Router1 and Router2 configurations. The main difference is the External (port3) interface connected to the ISP BGP network which has no administration access enabled for security reasons.
To configure Router3 interfaces - web-based manager
1. Go to System > Status > Dashboard.
2. Next to hostname, select Change.
3. Enter a hostname of Router3, and select OK.
4. Go to System > Network > Interfaces, edit port1, set the following information, and select OK.
Alias | internal |
IP/Network Mask | 10.11.102.3/255.255.255.0 |
Administrative Access | HTTPS SSH PING |
Description | Router1 |
Administrative Status | Up |
5. Edit port2, set the following information, and select OK.
Alias | Internal2 |
IP/Network Mask | 10.11.103.3/255.255.255.0 |
Administrative Access | HTTPS SSH PING |
Description | Router2 |
Administrative Status | Up |
6. Edit port3, set the following information, and select OK.
Alias | External |
IP/Network Mask | 172.20.120.3/255.255.255.0 |
Administrative Access | |
Description | ISP BGP |
Administrative Status | Up |