Information Columns Actual columns displayed depends on Column Settings. | |
State | Rogue AP — Use this status for unauthorized APs that On-wire status indicates are attached to your wired networks. Accepted AP — Use this status for APs that are an authorized part of your network or are neighboring APs that are not a security threat. To see accepted APs in the list, select Show Accepted. Unclassified — This is the initial status of a discovered AP. You can change an AP back to unclassified if you have mistakenly marked it as Rogue or Accepted. |
Online Status | Active AP Inactive AP Active ad-hoc WiFi device Inactive ad-hoc WiFi device |
SSID | The wireless service set identifier (SSID) or network name for the wireless interface. |
Security Type | The type of security currently being used. |
Channel | The wireless radio channel that the access point uses. |
MAC Address | The MAC address of the Wireless interface. |
Vendor Info | The name of the vendor. |
Signal Strength | The relative signal strength of the AP. Mouse over the symbol to view the signal-to-noise ratio. |
Detected By | The name or serial number of the AP unit that detected the signal. |
On-wire | A green up-arrow indicates a suspected rogue, based on the on-wire detection technique. A red down-arrow indicates AP is not a suspected rogue. |
First Seen | How long ago this AP was first detected. |
Last Seen | How long ago this AP was last detected. |
Rate | Data rate in bps. |