Name | HTTP_weghted_LB |
Type | IP |
Interface | port2 |
Virtual Server IP | 192.168.20.20 |
Load Balance Method | Weighted |
Virtual Server | HTTP_weghted_LB |
IP Address | 10.10.10.1 |
Port | Cannot be configured because the virtual server is an IP server. |
Weight | 1 |
Maximum Connections | 0 Setting Maximum Connections to 0 means the FortiGate unit does not limit the number of connections to the real server. Since the virtual server uses First Alive load balancing you may want to limit the number of connections to each real server to limit the traffic received by each server. In this example, the Maximum Connections is initially set to 0 but can be adjusted later if the real servers are getting too much traffic. |
Virtual Server | HTTP_weghted_LB |
IP Address | 10.10.10.2 |
Port | Cannot be configured because the virtual server is an IP server. |
Weight | 2 |
Maximum Connections | 0 Setting Maximum Connections to 0 means the FortiGate unit does not limit the number of connections to the real server. Since the virtual server uses First Alive load balancing you may want to limit the number of connections to each real server to limit the traffic received by each server. In this example, the Maximum Connections is initially set to 0 but can be adjusted later if the real servers are getting too much traffic. |
Virtual Server | HTTP_weghted_LB |
IP Address | 10.10.10.3 |
Port | Cannot be configured because the virtual server is an IP server. |
Weight | 3 |
Maximum Connections | 0 Setting Maximum Connections to 0 means the FortiGate unit does not limit the number of connections to the real server. Since the virtual server uses First Alive load balancing you may want to limit the number of connections to each real server to limit the traffic received by each server. In this example, the Maximum Connections is initially set to 0 but can be adjusted later if the real servers are getting too much traffic. |
Policy Type | Firewall |
Policy Subtype | Address |
Incoming Interface | port2 |
Source Address | all (or a more specific address) |
Outgoing Interface | port1 |
Destination Address | HTTP_weghted_LB |
Schedule | always |
Service | ALL |
Action | ACCEPT |
Enable NAT | Select this option and select Use Destination Interface Address. |