Address Name | Enter an address name, for example LocalNet. |
Type | Subnet |
Subnet/IP Range | Enter the IP address of the private network behind the spoke. For spoke_1, this is 10.1.1.0/24. For spoke_2, this is 10.1.2.0/24. |
Address Name | Enter an address name, for example, Spoke_net. |
Type | Subnet |
Subnet/IP Range | Enter the IP address of the aggregate protected network, 10.1.0.0/16. |
Incoming Interface | Select the virtual IPsec interface, toHub. |
Source Address | Select the aggregate protected network address Spoke_net. |
Outgoing Interface | Select the interface to the internal (private) network, port1. |
Destination Address | Select the address for this spoke’s protected network LocalNet. |
Action | Select ACCEPT. |
Incoming Interface | Select the interface to the internal private network, port1. |
Source Address | Select the address for this spoke’s protected network, LocalNet. |
Outgoing Interface | Select the virtual IPsec interface, toHub. |
Destination Address | Select the aggregate protected network address, Spoke_net. |
Action | Select ACCEPT. |