Local ID (peer ID)
The Local ID or peer ID can be used to uniquely identify one end of a VPN tunnel. This enables a more secure connection. Also if you have multiple VPN tunnels negotiating, this ensures the proper remote and local ends connect. When you configure it on your end, it is your Local ID. When the remote end connects to you, they see it as your peer ID.
If you are debugging a VPN connection, the Local ID is part of the VPN negotiations. You can use it to help troubleshoot connection problems.
To configure your Local ID
1. Go to VPN > IPsec > Tunnels and create the new custom tunnel or edit an existing tunnel.
2. Edit the Phase 1 Proposal (if it is not available, you may need to click the Convert to Custom Tunnel button).
3. Select Advanced.
4. In the Phase 1 Proposal section, enter your Local ID.
5. Select OK.
The default configuration is to accept all local IDs (peer IDs). If you have the Local ID set, the remote end of the tunnel must be configured to accept your Local ID.
To accept a specific Peer ID
1. Go to VPN > IPsec > Tunnels and create the new custom tunnel or edit an existing tunnel.
2. Edit the Phase 1 Proposal (if it is not available, you may need to click the Convert to Custom Tunnel button).
3. Select Aggressive mode.
4. For Peer Options, select This peer ID. This option becomes visible only when Aggressive mode is selected.
5. Enter the string the other end of the tunnel used for its Local ID.
6. Configure the rest of the Phase 1 entry as required.
7. Select OK.