Example policy route
Configure the following policy route to send all FTP traffic received at port1 out the port10 interface and to a next hop router at IP address 172.20.120.23. To route FTP traffic set protocol to 6 (for TCP) and set both of the destination ports to 21, the FTP port.
Protocol | 6 |
Incoming interface | port1 |
Source address / mask | 0.0.0.0/0.0.0.0 |
Destination address / mask | 0.0.0.0/0.0.0.0 |
Destination Ports | From 21 to 21 |
Type of Service | bit pattern: 00 (hex) bit mask: 00 (hex) |
Outgoing interface | port10 |
Gateway Address | 172.20.120.23 |