Testing traffic from VLAN_100 to VLAN_200
In this example, a route is traced between the two internal networks. The route target is a host on VLAN_200. The Windows traceroute command tracert is used.
From VLAN_100, access a Windows command prompt and enter this command:
C:\>tracert 10.1.2.2
Tracing route to 10.1.2.2 over a maximum of 30 hops:
1 <10 ms <10 ms <10 ms 10.1.1.1
2 <10 ms <10 ms <10 ms 10.1.2.2
Trace complete.
See Also