Adding vdomA firewall addresses
You need to define the addresses used by Company A’s internal network for use in security policies. This internal network is the 10.11.101.0/255.255.255.0 subnet.
The FortiGate unit provides one default address, “all”, that you can use when a security policy applies to all addresses as the source or destination of a packet.
To add the vdomA firewall addresses - web-based manager
1. In Virtual Domains, select vdomA.
2. Go to Policy & Objects > Objects > Addresses.
3. Select Create New.
4. Enter the following information and select OK:
Address Name | Ainternal |
Type | Subnet / IP Range |
Subnet / IP Range | 10.11.101.0/255.255.255.0 |
Interface | port4 |
To add the ABCdomain VDOM firewall addresses - CLI
config vdom
edit vdomA
config firewall address
edit Ainternal
set type ipmask
set subnet 10.11.101.0 255.255.255.0
end
end