cfg -h | Display help for all commands. |
cfg -r var | Remove variables. |
cfg -e | Export variables. |
cfg -s | List variables. |
cfg -x | Reset to factory defaults. |
cfg -c | Commit the change to flash. |
cfg -a var=value | Add or change variables. |
cw_diag help | Display help for all diagnose commands. |
cw_diag uptime | Show daemon uptime. |
cw_diag --tlog <on|off> | Turn on/off telnet log message. |
cw_diag --clog <on|off> | Turn on/off console log message. |
cw_diag baudrate [9600 | 19200 | 38400 | 57600 | 115200] | Set the console baud rate. |
cw_diag plain-ctl [0|1] | Show or change current plain control setting. |
cw_diag sniff-cfg ip port | Set sniff server ip and port. |
cw_diag sniff [0|1|2] | Enable/disable sniff packet. |
cw_diag stats wl_intf | Show wl_intf status. |
cw_diag admin-timeout [30] | Set shell idle timeout in minutes. |
cw_diag -c wtp-cfg | Show current wtp config parameters in control plane. |
cw_diag -c radio-cfg | Show current radio config parameters in control plane. |
cw_diag -c vap-cfg | Show current vaps in control plane. |
cw_diag -c ap-rogue | Show rogue APs pushed by AC for on-wire scan. |
cw_diag -c sta-rogue | Show rogue STAs pushed by AC for on-wire scan. |
cw_diag -c arp-req | Show scanned arp requests. |
cw_diag -c ap-scan | Show scanned APs. |
cw_diag -c sta-scan | Show scanned STAs. |
cw_diag -c sta-cap | Show scanned STA capabilities. |
cw_diag -c wids | Show scanned WIDS detections. |
cw_diag -c darrp | Show darrp radio channel. |
cw_diag -c mesh | Show mesh status. |
cw_diag -c mesh-veth-acinfo | Show mesh veth ac info, and mesh ether type. |
cw_diag -c mesh-veth-vap | Show mesh veth vap. |
cw_diag -c mesh-veth-host | Show mesh veth host. |
cw_diag -c mesh-ap | Show mesh ap candidates. |
cw_diag -c scan-clr-all | Flush all scanned AP/STA/ARPs. |
cw_diag -c ap-suppress | Show suppressed APs. |
cw_diag -c sta-deauth | Ee-authenticate an STA. |