Chapter 17 Traffic Shaping for FortiOS 5.0 : Troubleshooting traffic shaping : Session list details with dual traffic shaper
  
Session list details with dual traffic shaper
When a Security Policy has a different traffic shaper for each direction, it is reflected in the session list output from the CLI:
diagnose system session list
 
session info: proto=6 proto_state=02 expire=115 timeout=3600 flags=00000000 sock
flag=00000000 sockport=0 av_idx=0 use=4
origin-shaper=Limit_25Mbps prio=1 guarantee 25600/sec max 204800/sec traffic 48/sec
reply-shaper=Limit_100Mbps prio=1 guarantee 102400/sec max 204800/sec traffic 0/sec
ha_id=0 hakey=44020
policy_dir=0 tunnel=/
state=may_dirty rem os rs
statistic(bits/packets/allow_err): org=96/2/1 reply=0/0/0 tuples=2
orgin->sink: org pre->post, reply pre->post dev=2->3/3->2 gwy=10.160.0.1/0.0.0.0
hook=pre dir=org act=dnat 192.168.171.243:2538->192.168.182.110:80(10.160.0.1:80)
hook=post dir=reply act=snat 10.160.0.1:80->192.168.171.243:2538(192.168.182.110:80)
pos/(before,after) 0/(0,0), 0/(0,0)
misc=0 policy_id=2 auth_info=0 chk_client_info=0 vd=0 serial=00011e81 tos=ff/ff app=0 dd_type=0 dd_rule_id=0
See also 
c
Shaper diagnose commands
Packet loss with statistics on shapers
Interface diagnosis
Packet loss with statistics on shapers
Packet lost with the debug flow
Additional Information