Chapter 2 Advanced Routing for FortiOS 5.0 : Routing Information Protocol (RIP) : RIPng — RIP and IPv6 : Network layout and assumptions : Assumptions
  
Assumptions
The following assumptions have been made concerning this example.
All FortiGate units have 5.0 firmware, and are running factory default settings.
All CLI and web-based manager navigation assumes the unit is running in NAT/Route operating mode, with VDOMs disabled.
All FortiGate units have interfaces labelled port1 and port2 as required.
All firewalls have been configured for each FortiGate unit to allow the required traffic to flow across interfaces.
All network devices are support IPv6 and are running RIPng.