Configuring Router2
Router2 configuration is the same as Router1, except Router2 also has the DSL interface to configure.
The DSL interface is configured with a username of “user1” and a password of “ospf_example”. The default gateway will be retrieved from the ISP, and the defaults will be used for the rest of the PPPoE settings.
To configure Router2 interfaces - web-based manager
1. Go to System > Dashboard > Status.
2. Beside the host name, select Change.
3. Enter a hostname of Router2, and select OK.
4. Go to System > Network > Interfaces, edit port1, set the following information, and select OK.
Alias | internal |
IP/Netmask | 10.11.101.2/255.255.255.0 |
Administrative Access | HTTPS SSH PING |
Description | Head office and Router1 |
Administrative Status | Up |
5. Edit port2, set the following information, and select OK.
Alias | External |
IP/Netmask | 10.11.103.2/255.255.255.0 |
Administrative Access | HTTPS SSH PING |
Description | Router3 |
Administrative Status | Up |
6. Edit DSL (port3), set the following information, and select OK.
Alias | DSL |
Addressing Mode | PPPoE |
Username | user1 |
Password | ospf_example |
Unnumbered IP address | 10.12.101.2/255.255.255.0 |
Retrieve default gateway from server | Enable |
Administrative Access | HTTPS SSH PING |
Description | DSL |
Administrative Status | Up |