Chapter 6 Deploying Wireless Networks for FortiOS 5.0 : Wireless network monitoring : Monitoring wireless clients
  
Monitoring wireless clients
To view connected clients on a FortiWiFi unit
• Go to WiFi Controller > Monitor > Client Monitor.
The following information is displayed:
SSID
The SSID that the client connected to.
FortiAP
The serial number of the FortiAP unit to which the client connected.
User
User name
IP
The IP address assigned to the wireless client.
Device
 
Auth
The type of authentication used.
Channel
WiFi radio channel in use.
Bandwidth Tx/Rx
Client received and transmitted bandwidth, in Kbps.
Signal Strength / Noise
The signal-to-noise ratio in deciBels calculated from signal strength and noise level.
Signal Strength
 
Association Time
How long the client has been connected to this access point.
Results can be filtered. Select the filter icon on the column you want to filter. Enter the values to include or select NOT if you want to exclude the specified values.