Chapter 10 Install and System Administration for FortiOS 5.0 : VLANs : VLANs in transparent mode : Test the configuration : Testing traffic from VLAN_100 to VLAN_200
  
Testing traffic from VLAN_100 to VLAN_200
In this example, a route is traced between the two internal networks. The route target is a host on VLAN_200. The Windows traceroute command tracert is used.
From VLAN_100, access a Windows command prompt and enter this command:
C:\>tracert 10.1.2.2
Tracing route to 10.1.2.2 over a maximum of 30 hops:
1 <10 ms <10 ms <10 ms 10.1.1.1
2 <10 ms <10 ms <10 ms 10.1.2.2
Trace complete.
See Also
Test the configuration
Configure the Cisco switch and router
Example of VLANs in transparent mode