The following example shows get system ha status output for a cluster of two FortiGate-5001SX units operating in active-active mode. The cluster group ID, session pickup, load balance all, and the load balancing schedule are all set to the default values. The device priority of the primary unit is also set to the default value. The device priority of the subordinate unit has been reduced to 100. The host name of the primary unit is 5001_Slot_4. The host name of the subordinate unit in is 5001_Slot_3.

The command output was produced by connecting to the primary unit CLI (host name 5001_Slot_4).

The following command output was produced by using execute HA manage 0 to log into the subordinate unit CLI of the cluster shown in the previous example. The host name of the subordinate unit is 5001_Slot_3.

The following example shows get system ha status output for a cluster of three FortiGate-5001 units operating in active-passive mode. The cluster group ID is set to 20 and session pickup is enabled. Load balance all and the load balancing schedule are set to the default value. The device priority of the primary unit is set to 200. The device priorities of the subordinate units are set to 128 and 100. The host name of the primary unit is 5001_Slot_5. The host names of the subordinate units are 5001_Slot_3 and 5001_Slot_4.

The following example shows get system ha status output for a cluster of two FortiGate-5001 units with virtual clustering enabled. This command output was produced by logging into the primary unit for virtual cluster 1 (hostname: 5001_Slot_4, serial number FG50012204400045).

The virtual clustering output shows that the cluster unit with host name 5001_Slot_4 and serial number FG50012204400045 is operating as the primary unit for virtual cluster 1 and the subordinate unit for virtual cluster 2.

For virtual cluster 1 the cluster unit that you have logged into is operating in the work state and the serial number of the primary unit for virtual cluster 1 is FG50012204400045. For virtual cluster 2 the cluster unit that you have logged into is operating in the standby state and the serial number of the primary unit for virtual cluster 2 is FG50012205400050.

The following example shows get system ha status output for the same cluster as shown in the previous example after using execute ha manage 0 to log into the primary unit for virtual cluster 2 (hostname: 5001_Slot_3, serial number FG50012205400050).

The following example shows get system ha status output for a virtual cluster configuration where the cluster unit with hostname: 5001_Slot_4 and serial number FG50012204400045 is the primary unit for both virtual clusters. This command output is produced by logging into cluster unit with host name 5001_Slot_4 and serial number FG50012204400045.