Chapter 9 High Availability for FortiOS 5.0 : HA and failover protection : Synchronizing the configuration : Console messages when configuration synchronization fails
  
Console messages when configuration synchronization fails
If you connect to the console of a subordinate unit that is out of synchronization with the primary unit, messages similar to the following are displayed.
slave is not in sync with master, sequence:0. (type 0x3)
slave is not in sync with master, sequence:1. (type 0x3)
slave is not in sync with master, sequence:2. (type 0x3)
slave is not in sync with master, sequence:3. (type 0x3)
slave is not in sync with master, sequence:4. (type 0x3)
global compared not matched
If synchronization problems occur the console message sequence may be repeated over and over again. The messages all include a type value (in the example type 0x3). The type value can help Fortinet Support diagnose the synchronization problem.
Table 59: HA out of sync object messages and the configuration objects that they reference  
Out of Sync Message
Configuration Object
HA_SYNC_SETTING_CONFIGURATION = 0x03
/data/config
HA_SYNC_SETTING_AV = 0x10
HA_SYNC_SETTING_VIR_DB = 0x11
/etc/vir
HA_SYNC_SETTING_SHARED_LIB = 0x12
/data/lib/libav.so
HA_SYNC_SETTING_SCAN_UNIT = 0x13
/bin/scanunitd
HA_SYNC_SETTING_IMAP_PRXY = 0x14
/bin/imapd
HA_SYNC_SETTING_SMTP_PRXY = 0x15
/bin/smtp
HA_SYNC_SETTING_POP3_PRXY = 0x16
/bin/pop3
HA_SYNC_SETTING_HTTP_PRXY = 0x17
/bin/thttp
HA_SYNC_SETTING_FTP_PRXY = 0x18
/bin/ftpd
HA_SYNC_SETTING_FCNI = 0x19
/etc/fcni.dat
HA_SYNC_SETTING_FDNI = 0x1a
/etc/fdnservers.dat
HA_SYNC_SETTING_FSCI = 0x1b
/etc/sci.dat
HA_SYNC_SETTING_FSAE = 0x1c
/etc/fsae_adgrp.cache
HA_SYNC_SETTING_IDS = 0x20
/etc/ids.rules
HA_SYNC_SETTING_IDSUSER_RULES = 0x21
/etc/idsuser.rules
HA_SYNC_SETTING_IDSCUSTOM = 0x22
HA_SYNC_SETTING_IDS_MONITOR = 0x23
/bin/ipsmonitor
HA_SYNC_SETTING_IDS_SENSOR = 0x24
/bin/ipsengine
HA_SYNC_SETTING_NIDS_LIB = 0x25
/data/lib/libips.so
HA_SYNC_SETTING_WEBLISTS = 0x30
HA_SYNC_SETTING_CONTENTFILTER = 0x31
/data/cmdb/webfilter.bword
HA_SYNC_SETTING_URLFILTER = 0x32
/data/cmdb/webfilter.urlfilter
HA_SYNC_SETTING_FTGD_OVRD = 0x33
/data/cmdb/webfilter.fgtd-ovrd
HA_SYNC_SETTING_FTGD_LRATING = 0x34
/data/cmdb/webfilter.fgtd-ovrd
HA_SYNC_SETTING_EMAILLISTS = 0x40
HA_SYNC_SETTING_EMAILCONTENT = 0x41
/data/cmdb/spamfilter.bword
HA_SYNC_SETTING_EMAILBWLIST = 0x42
/data/cmdb/spamfilter.emailbwl
HA_SYNC_SETTING_IPBWL = 0x43
/data/cmdb/spamfilter.ipbwl
HA_SYNC_SETTING_MHEADER = 0x44
/data/cmdb/spamfilter.mheader
HA_SYNC_SETTING_RBL = 0x45
/data/cmdb/spamfilter.rbl
HA_SYNC_SETTING_CERT_CONF = 0x50
/etc/cert/cert.conf
HA_SYNC_SETTING_CERT_CA = 0x51
/etc/cert/ca
HA_SYNC_SETTING_CERT_LOCAL = 0x52
/etc/cert/local
HA_SYNC_SETTING_CERT_CRL = 0x53
/etc/cert/crl
HA_SYNC_SETTING_DB_VER = 0x55
HA_GET_DETAIL_CSUM = 0x71
HA_SYNC_CC_SIG = 0x75
/etc/cc_sig.dat
HA_SYNC_CC_OP = 0x76
/etc/cc_op
HA_SYNC_CC_MAIN = 0x77
/etc/cc_main
HA_SYNC_FTGD_CAT_LIST = 0x7a
/migadmin/webfilter/ublock/ftgd/ data/