restore
Use this command to restore the configuration or database from a file and change the FortiManager unit image. These commands will disconnect all sessions and restart the FortiManager unit.
Syntax
execute restore all-settings {ftp | sftp} <ip:port> <filename> <username> <password> [<crptpasswd>] [option1+option2+...]
execute restore all-settings <scp> <ip> <filename> <username> <ssh-cert> [<crptpasswd>] [option1+option2+...]
execute restore image ftp <filepath> <ip:port> <username> <password>
execute restore image tftp <filename> <ip>
execute restore logs <device name(s)> {ftp | scp | sftp} <ip> <username> <password> <directory> [vdlist]
execute restore logs-only <device name(s)> {ftp | scp | sftp} <ip> <username> <password> <directory> [vdlist]
execute restore reports <report schedule name(s)> {ftp | scp | sftp} <ip> <username> <password> <directory> [vdlist]
execute restore reports-config {<adom_name> | all]} {ftp | scp | sftp} <ip> <username> <password> <directory> [full]
|
Variable |
Description |
|---|---|
|
all-settings |
Restore all FortiManager settings from a file on a server. The new settings replace the existing settings, including administrator accounts and passwords. |
|
image |
Upload a firmware image from a TFTP server to the FortiManager unit. The FortiManager unit reboots, loading the new firmware. |
|
logs |
Restore the device logs. |
|
logs-only |
Restore only the device logs. |
|
reports |
Restore device reports. |
|
reports-config |
Restore the reports configuration. |
|
ftp |
Restore from an FTP server. |
|
sftp |
Restore from a SFTP server. |
|
scp |
Restore from an SCP server. |
|
<ip:port> |
Enter the IP address of the server to get the file from and optionally , for FTP servers, the port number. |
|
<ip> |
Enter the server IP address. |
|
<device name(s)> |
Enter the device name(s) separated by a comma, or enter |
|
<report schedule name(s)> |
Enter the report schedule name(s) separated by a comma, or enter |
|
{<adom_name> | all]} |
Select to backup a specific ADOM or all ADOMs. |
|
<filename> |
Enter the file to get from the server. You can enter a path with the filename, if required. |
|
<filepath> |
Enter the file to get from the server. You can enter a path with the filename, if required. |
|
<username> |
The username to log on to the server. This option is not available for restore operations from TFTP servers. |
|
<password> |
The password for username on the server. This option is not available for restore operations from TFTP servers. |
|
<ssh-cert> |
The SSH certification for the server. This option is only available for restore operations from SCP servers. |
|
[<crptpassword>] |
Optional password to protect backup content. Use |
|
<directory> |
Enter the directory. |
|
[full] |
Reports configuration full restoration. |
|
[option1+option2+...] |
Select whether to keep IP, routing, and HA info on the original unit. |
Example
This example shows how to upload a configuration file from a FTP server to the FortiManager unit. The name of the configuration file on the FTP server is backupconfig. The IP address of the FTP server is 192.168.1.23. The user is admin with a password of mypassword. The configuration file is located in the /usr/local/backups/ directory on the TFTP server.
execute restore all-settings 192.168.1.23 /usr/local/backups/backupconfig admin mypasword
