System Settings : Advanced : SNMP v1/v2c : Configuring the SNMP agent
 
Configuring the SNMP agent
The SNMP agent sends SNMP traps that originate on the FortiManager system to an external monitoring SNMP manager defined in one of the FortiManager SNMP communities. Typically an SNMP manager is an application on a local computer that can read the SNMP traps and generate reports or graphs from them.
The SNMP manager can monitor the FortiManager system to determine if it is operating properly, or if there are any critical events occurring. The description, location, and contact information for this FortiManager system will be part of the information an SNMP manager will have — this information is useful if the SNMP manager is monitoring many devices, and it will enable faster responses when the FortiManager system requires attention.
Go to System Settings > Advanced > SNMP v1/v2c to configure the SNMP agent.
Figure 63: SNMP configuration
The following information is available:
SNMP Agent
Select to enable the FortiManager SNMP agent. When this is enabled, it sends FortiManager SNMP traps.
 
Description
Enter a description of this FortiManager system to help uniquely identify this unit.
 
Location
Enter the location of this FortiManager system to help find it in the event it requires attention.
 
Contact
Enter the contact information for the person in charge of this FortiManager system.
Communities
The list of SNMP communities added to the FortiManager configuration.
 
Create New
Select Create New to add a new SNMP community. If SNMP agent is not selected, this control will not be visible.
For more information, see “Configuring an SNMP community”.
Community Name
The name of the SNMP community.
Queries
The status of SNMP queries for each SNMP community.
Traps
The status of SNMP traps for each SNMP community.
Enable
Select to enable or deselect to disable the SNMP community.
Delete icon
Select to remove an SNMP community.
Edit icon
Select to edit an SNMP community.