Administrative access
Administrative access enables an administrator to connect to the FortiManager system to view and change configuration settings. The default configuration of your FortiManager system allows administrative access to one or more of the interfaces of the unit as described in your FortiManager system
QuickStart Guide and
Install Guide available from the Fortinet Document Library.
Administrative access can be configured in IPv4 or IPv6 and includes the following settings:
HTTPS HTTP | PING SSH | TELNET SNMP | Web Service |
To change administrative access to your FortiManager system:
1. Go to System Settings > Network.
Administrative access is configured for port1. To configure administrative access for another interface, select All Interfaces, and then select the interface to edit.
2. Set the IPv4 IP/Netmask or IPv6 Address.
3. Select one or more Administrative Access types for the interface.
4. Select Service Access, FortiGate Updates, and Web Filtering/Antispam if required.
5. Set the Default Gateway.
6. Configure the primary and secondary DNS servers.
7. Select Apply.
In addition to the settings listed above, you can select to enable access on interface from the All Interfaces window.
