Device Manager : Managing devices : Editing device information
 
Editing device information
You can edit device information including the Name, Description, IP address, Admin User, and Password.
To edit information for a single device:
1. On the tree menu, select the ADOM, and device group.
2. Select a device from the device list then select the Edit icon, or right-click on the device row and select Edit from the right-click context menu.
Figure 101: Edit a device
Name
The name of the device.
Description
Descriptive information about the device.
Company /Organization
Company or organization information.
Country
Enter the country.
Province/State
Enter the province or state.
City
Enter the city.
Contact
Enter the contact name.
IP Address
The IP address of the device.
Admin User
The admin user username.
Password
The admin user password
Device Information
Information about the device, including serial number, device model, firmware version, connected interface, HA mode, cluster name, and cluster members.
Disk Log Quota
The amount of space that the disk log is allowed to use, in MB.
When Allocated Disk Space is Full
The action for the system to take when the disk log quota is filled.
Secure Connection
Select check box to enable this feature. Secure Connection secures OFTP traffic through an IPsec tunnel.
 
ID
The ID is the device serial number.
 
Pre-Shared Key
The pre-shared key for the IPsec connection between the FortiGate and FortiManager.
Device Permissions
The device’s permissions.
 
Enable Secure Connection to secure OFTP traffic over IPsec. When enabling Secure Connection, load on the FortiManager is also increased. This feature is disabled by default.
 
In an HA environment, if you enable Secure Connection on one cluster member, you need to enable Secure Connection on the other cluster members.
3. After making the appropriate changes select Apply.
See also 
• Importing and exporting device lists