Configuring IP groups
IP groups include groups of IP addresses that can be used when configuring access control rules. For information about access control rules, see
“Configuring access control rules”.
To configure an IP group
1. Go to Profile > Group > IP Group.
2. Either click New to add a profile or double-click profile to modify it.
A dialog appears.
3. For a new group, enter a name in Group name.
The name must contain only alphanumeric characters. Spaces are not allowed.
4. Under IP Groups, click New.
A field appears under IP/Netmask.
5. Enter the IP address and netmask of the group. Use the netmask, the portion after the slash (/), to specify the matching subnet.
For example, enter 10.10.10.10/24 to match a 24-bit subnet, or all addresses starting with 10.10.10. This will appear as 10.10.10.0/24 in the access control rule table, with the 0 indicating that any value is matched in that position of the address.
Similarly, 10.10.10.10/32 will appear as 10.10.10.10/32 and match only the 10.10.10.10 address.
To match any address, enter 0.0.0.0/0.
6. Click Create.