get : router info protocols
 
router info protocols
Use this command to show the current states of active routing protocols. Inactive protocols are not displayed.
Syntax
get router info protocols
 
Routing Protocol is "rip"
Sending updates every 30 seconds with +/-50%
Timeout after 180 seconds, garbage collect after 120 seconds
Outgoing update filter list for all interface is not set
Incoming update filter list for all interface is not set
Default redistribution metric is 1
Redistributing:
Default version control: send version 2, receive version 2
Interface Send Recv Key-chain
Routing for Networks:
Routing Information Sources:
Gateway Distance Last Update Bad Packets Bad Routes
Distance: (default is 120)
 
Routing Protocol is "ospf 0"
Invalid after 0 seconds, hold down 0, flushed after 0
Outgoing update filter list for all interfaces is
Incoming update filter list for all interfaces is
Redistributing:
Routing for Networks:
Routing Information Sources: Gateway Distance Last Update
Distance: (default is 110) Address Mask Distance List
 
Routing Protocol is "bgp 5"
IGP synchronization is disabled
Automatic route summarization is disabled
Default local-preference applied to incoming route is 100
Redistributing:
Neighbor(s):
Address AddressFamily FiltIn FiltOut DistIn DistOut RouteMapIn RouteMapOut Weight
  192.168.20.10 unicast