get : router info multicast
 
router info multicast
Use this command to display information about a Protocol Independent Multicasting (PIM) configuration. Multicast routing is supported in the root virtual domain only.
Syntax
get router info multicast <keywords>
<keywords>
Description
igmp
Show Internet Group Management Protocol (IGMP) membership information according to one of these qualifiers:
Type groups [{<interface-name> | <group-address>}] to show IGMP information for the multicast group(s) associated with the specified interface or multicast group address.
Type groups-detail [{<interface-name> | <group-address>}] to show detailed IGMP information for the multicast group(s) associated with the specified interface or multicast group address.
Type interface [<interface-name>] to show IGMP information for all multicast groups associated with the specified interface.
pim dense-mode
Show information related to dense mode operation according to one of these qualifiers:
Type interface to show information about PIM-enabled interfaces.
Type interface-detail to show detailed information about PIM-enabled interfaces.
Type neighbor to show the current status of PIM neighbors.
Type neighbor-detail to show detailed information about PIM neighbors.
Type next-hop to show information about next-hop PIM routers.
Type table [<group-address>][<source-address>] to show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.
pim sparse-mode
Show information related to sparse mode operation according to one of these qualifiers:
Type bsr-info to show Boot Strap Router (BSR) information.
Type interface to show information about PIM-enabled interfaces.
Type interface-detail to show detailed information about PIM-enabled interfaces.
Type neighbor to show the current status of PIM neighbors.
Type neighbor-detail to show detailed information about PIM neighbors.
Type next-hop to show information about next-hop PIM routers.
Type rp-mapping to show Rendezvous Point (RP) information.
Type table [<group-address>][<source-address>] to show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.
table [<group‑address>] [<source‑address>]
Show the multicast routing table entries associated with the specified multicast group address and/or multicast source address.
table-count [<group‑address>]
[<source‑address>]
Show statistics related to the specified multicast group address and/or multicast source address.