system : stp
 
stp
Use this command to configure Spanning Tree Protocol on an Internal interface switch in switch mode.
Syntax
config system stp
set config-revision <int>
set forward-delay <secs_int>
set hello-time <secs_int>
set max-age <secs_int>
set max-hops <hops_int>
set region-name <name_str>
set status {enable | disable}
set switch-priority <prio_int>
end
Variable
Description
Default
config-revision <int>
Set the configuration revision. Range 0-65535.
0
forward-delay <secs_int>
Set forwarding delay. Range 4 to 30.
15
hello-time <secs_int>
Set hello time. Range 1 to 10.
2
max-age <secs_int>
Set maximum packet age. Range 6 to 40.
20
max-hops <hops_int>
Set maximum number of hops. Range 1 to 40.
20
region-name <name_str>
Set region name.
null
status {enable | disable}
Enable or disable STP.
enable
switch-priority <prio_int>
Set priority. Permitted values: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440.
32768