system : port-pair
 
port-pair
Use this command to define a port pair in Transparent mode. In a port pair, all L2 packets received on one port are forwarded to the other port. It is not possible to define firewall policies into or out of the port-pair, only between the members of the pair. A maximum of 256 port pairs can be defined in any VDOM, 512 globally.
Syntax
config system port-pair
edit <port-pair_name>
set member <portname1> <portname2>
end
Variable
Description
Default
edit <port-pair_name>
Enter a name for the port pair.
No default.
member <portname1> <portname2>
Enter the two port names that comprise the pair.
No default.