system : nat64
 
nat64
Use this command to configure communication between IPv6 hosts and IPv4 servers.
Syntax
config system nat64
set status {enable | disable}
set nat64-prefix <IPv6_addr>
set always-synthesize-aaaa-record {enable | disable}
end
Variable
Description
Default
status {enable | disable}
Enable or disable NAT64.
disable
nat64-prefix <IPv6_addr>
Enter the NAT64 prefix. It must be ::/96.
64:ff9b::/96
always-synthesize-aaaa-record {enable | disable}
Enable or disable AAAA record synthesis.
enable