system : mac-address-table
 
mac-address-table
Use this command to create a static MAC table. The table can hold up to 200 entries.
This command is available in Transparent mode only.
Syntax
config system mac-address-table
edit <mac-address_hex>
set interface <if_name>
set reply-substitute <mac‑address_hex>
end
Variable
Description
Default
edit <mac-address_hex>
Enter the MAC address as six pairs of hexadecimal digits separated by colons, e.g.: 11:22:33:00:ff:aa
No default.
interface <if_name>
Enter the name of the interface to which this MAC table entry applies.
No default.
reply-substitute <mac‑address_hex>
Optionally, define a substitute MAC address to use in reply. Then define a MAC address table entry for the reply-substitute MAC address, specifying the interface to which it applies.
No default.