system : lte-modem
 
lte-modem
Use this command to configure an LTE/WIMAX modem. This command is available only in NAT/Route mode.
Syntax
config system lte-modem
set status {enable | disable}
set apn <login_str>
set authtype {none | pap | chap}
set extra-init <init_str>
set holddown-timer <sec_int>
set mode {standalone | redundant}
set password <pwd_str>
set username <name_str>
end
Variable
Description
Default
status {enable | disable}
Enable or disable LTE modem.
disable
apn <login_str>
Enter the APN login string.
No default.
authtype {none | pap | chap}
Select the authentication protocol. none does not use username or password.
none
extra-init <init_str>
Optionally, define extra modem initialization string.
No default.
holddown-timer <sec_int>
Set holddown time in seconds. Range 10 to 60.
30
mode {standalone | redundant}
Select the operation mode.
standalone
password <pwd_str>
Enter the password for PDP-IP packet data calls.
No default.
username <name_str>
Enter the user name for PDP-IP packet data calls.
No default.