system : amc
 
amc
Use this command to configure AMC ports on your FortiGate unit.
Syntax
config system amc
set {dw1 | dw2} {adm‑fb8 | adm‑fe8 | adm‑xb2 | adm‑xd4 | adm‑xe2 | auto | none}
set {sw1 | sw2} {asm‑ce4 | asm‑cx4 | asm‑disk | asm‑fb4 | asm‑et4 | asm‑fx2 | auto | none}
end
Variable
Description
Default
{dw1 | dw2} {adm‑fb8 | adm‑fe8 | adm‑xb2 | adm‑xd4 | adm‑xe2 | auto | none}
Configure this double width AMC slot for the following type of module.
adm-fb8 — AMC double width 8G NP2 accelerated network interface module
adm-fe8 — AMC double width 8G FE8 accelerated network interface module
adm-xb2 — AMC double width 2XG NP2 accelerated network interface module
adm-xd4 — AMC double width 4XG XD4 accelerated network interface module
adm-xe2 — AMC double width 2XG XE2 accelerated network interface module
auto — support any card that is inserted
none — not configured, disable slot
auto
{sw1 | sw2} {asm‑ce4 | asm‑cx4 | asm‑disk | asm‑fb4 | asm‑et4 | asm‑fx2 | auto | none}
Configure this single width AMC port for the following type of card.
asm-ce4 — AMC single width, 4G CE4 accelerated network interface module
asm-cx4 — AMC single width, 4G bypass
asm-disk — AMC Single width SCSI hard disk card, such as ASM‑S08
asm-fb4 — AMC single width 4G NP2 accelerated network interface module
asm-et4 — AMC single width T1/E1 network interface module
asm-fx2 — AMC single width, 2G bypass
auto — support any single width card
none — not configured, disable slot
auto