router : rip : config network
 
config network
Use this subcommand to identify the networks for which to send and receive RIP updates. If a network is not specified, interfaces in that network will not be advertised in RIP updates. The prefix field is optional.
Variable
Description
Default
edit <network_id>
Enter an entry number for the RIP network. The number must be an integer.
No default.
prefix <address_ipv4mask>
Enter the IPv4 address and netmask for the RIP network.
0.0.0.0
0.0.0.0
Example
Use the following command to enable RIP for the interfaces attached to networks specified by the IP address 10.0.0.0 and the netmask 255.255.255.0.
config router rip
config network
edit 2
set prefix 10.0.0.0 255.255.255.0
end
end