router : rip : config neighbor
 
config neighbor
Use this subcommand to enable RIP to send unicast routing updates to the router at the specified address. You can use the neighbor subcommand and “passive-interface <name_str>” to allow RIP to send unicast updates to the specified neighbor while blocking broadcast updates on the specified interface. You can configure multiple neighbors.
The ip field is required. All other fields are optional.
Variable
Description
Default
edit <neighbor_id>
Enter an ID number for the RIP neighbor. The number must be an integer.
No default.
ip <address_ipv4>
Enter the IPv4 address of the neighboring router to which to send unicast updates.
0.0.0.0
Example
This example shows how to specify that the router at 192.168.21.20 is a neighbor.
config router rip
config neighbor
edit 1
set ip 192.168.21.20
end
end